Table of Contents
Advertisement
ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Follow the steps below:
i In the "SMS Alarm" field, specify the SMS Alarm you want to
execute in Action from the dropdown list.
Alarm you select has to be enabled in Advanced Setting. The
selected SMS Alarm message such as phone numbers and message
content will be displayed for you to verify if this is the SMS Alarm
you want to send.
ii Click "OK" button to confirm the settings and return to the Rule
settings page.
11.2.10 SNMP Trap
You can send a specific SNMP Trap when executing a THEN/ELSE
Action statement. The setting page is show as below:
Follow the steps below:
i In the "Trap" field, specify the SNMP Trap you want to execute in
Action from the dropdown list.
select has to be the pre-set SNMP Trap in the
of Advanced
such as "Variable Bindings" and message content will be displayed
for you to verify if this is the SNMP Trap you want to send.
ii Select the Action Execution Frequency, there are two options as
"One Time" and "Repeat" for selection. Please refer to
THEN/ELSE Action
Time" and "Repeat" operation.
iii Input the value in the "Waiting Time" field, it means after the action
be executed, how long the system will delay to execute the next
Action. The unit will be second(s).
Figure11-43 : SNMP Trap Action Setting Page
Please note, the SNMP Trap you
Setting" section. The selected SNMP Trap message
Setting" section for the description of "One
Please note: the SMS
"SNMP Trap Setting
"11.2
227
Advertisement
Table of Contents
