ICP DAS USA PMC-523 Series User Manual page 335

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
prefix com2pm2
information above but with prefix
 The SNMP Variables naming rule of the power meters on LAN
The Power Meter1 SNMP Variables are similar as listed information above but with prefix
lanpm1, the Power Meter2 SNMP Variables are similar to listed information above but with
prefix lanpm2
information above but with prefix
I/O Module1(On Com1)
The SNMP Variables naming rule of the I/O modules that are connected to PMD.
 Every I/O module that is connected to PMD-2201/PMD-4201 provides the SNMP Variables
as above (with its specific prefix denoted).
 The SNMP Variables naming rule of the I/O modules on Com1
The I/O Module1 SNMP Variables are shown as above (with prefix com1io1), the I/O
Module2 SNMP Variables are similar to listed information above but with prefix
instead, and the I/O Module16 SNMP Variables are also similar to the listed information
above but with prefix
 The SNMP Variables naming rule of the I/O modules on Com2
instead, and the Power Meter16 SNMP Variables are also similar to the listed
com2pm16
instead, and the Power Meter16 SNMP Variables are also similar to the listed
lanpm16
com1io1Index
com1io1ModbusID
com1io1ConnectionStatus
com1io1CoilOutputAmount
com1io1HoldingRegAmount
com1io1DiscInputName
com1io1DiscInputModbusAdd
com1io1DiscInputResetCounter
com1io1CoilOutputName
com1io1CoilOutputModbusAdd
com1io1InputRegIndex
com1io1InputRegValue
com1io1InputRegType
com1io1InputRegOffset
com1io1InputRegScaleMin
com1io1HoldingRegIndex
com1io1HoldingRegValue
com1io1HoldingRegType
com1io1HoldingRegOffset
com1io16 instead.
instead.
instead.
com1io1Interface
com1io1ModuleName
com1io1DiscInputAmount
com1io1InputRegAmount
com1io1DiscInputIndex
com1io1DiscInputValue
com1io1DiscInputCounterValue
com1io1CoilOutputIndex
com1io1CoilOutputValue
com1io1CoilOutputAdvFunction
com1io1InputRegName
com1io1InputRegModbusAdd
com1io1InputRegScaleRatio
com1io1InputRegDeadband
com1io1InputRegScaleMax
com1io1HoldingRegName
com1io1HoldingRegModbusAdd
com1io1HoldingRegScaleRatio
com1io1HoldingRegDeadband
com1io2
320