Ibm Bluemix; Figure11-32 : Microsoft Azure Publish Message Action Setting; Figure11-33 : Microsoft Azure Reset Variable Action Setting Page - ICP DAS USA PMC-523 Series User Manual

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Follow the steps below:
i Select a pre-set Publish message from the dropdown list of the
ii Click "OK" button to confirm the settings and return to the Rule
11.2.4.3 Reset Variable
You can reset the saved content of the subscribe variable from
Microsoft Azure when executing a THEN/ELSE Action statement;
the editing page is shown as below:
Follow the steps below:
i Select a pre-set Subscribe variable from the dropdown list of the
ii Click "OK" button to confirm the settings and return to the Rule

11.2.5 IBM Bluemix

Figure11-32 : Microsoft Azure Publish Message action setting

"Message" field. The Publish message will be displayed for you
to verify if this is the message you are going to send to.
settings page.

Figure11-33 : Microsoft Azure Reset Variable action setting page

"Variable Name" field. When this action is executed,
PMC/PMD would reset the content of the variable, and the
evaluation result of the IF statement which is associated with
the variable will be verified again.
settings page.
221