Table of Contents
Advertisement
ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Follow the steps below:
i In the "Message" field, specify the Messenger message you want to
send in Action from the dropdown list. The selected Messenger
message will be displayed for you to verify if this is the Messenger
message you want to send.
ii Click "OK" button to confirm the settings and return to the Rule
settings page.
11.2.13 Data Logger
You can execute "One-Time Log" in the Action statements to perform
data recording one-time only when an event is triggered. User can also
perform "Start" or "Stop" operation on data logger. The setting page is
show as below:
Follow the steps below:
i In the "Action" field, specify the data logger operation you want to
execute in Action from the dropdown list.
ii Click "OK" button to confirm the settings and return to the Rule
settings page.
11.2.14 Rule Status
The Rule Status can be modified to be Disable or Enable in the Action.
The editing page for Rule Status Action Setting is shown as below:
Follow the steps below:
i Specify the Rule (It has to be a previously saved Rule) that is going
to be changed in the Action Condition statement from the dropdown
Figure11-46 : Data Logger action setting page
Figure11-47 : Rule Status action setting page
229
Advertisement
Table of Contents
