Figure11-34 : Ibm Bluemix Function Status Action Setting; Figure11-35 : Ibm Bluemix Publish Message Action Setting - ICP DAS USA PMC-523 Series User Manual

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Click on "IBM Bluemix", 3 options will appear as the following:
"Function Status", "Publish Message" and "Reset Variable" .
11.2.5.1 Function Status
User can execute an action to change the connection operation
between IBM Bluemix and PMC/PMD in the THEN/ELSE Action
statement; the editing page is shown as follow:
Follow the steps below:
i Specify the connection operation between IBM Bluemix and
ii Click "OK" button to confirm the settings and return to the Rule
11.2.5.2 Publish Message
You can publish messages to IBM Bluemix when executing a
THEN/ELSE Action statement; the editing page is shown as
below:
Follow the steps below:
i Select a pre-set Publish message from the dropdown list of the
ii Click "OK" button to confirm the settings and return to the Rule

Figure11-34 : IBM Bluemix Function Status action setting

PMC/PMD to be "Disable" or "Enable" from the dropdown list
of the "Status" field.
settings page.

Figure11-35 : IBM Bluemix Publish Message action setting

"Message" field. The Publish message will be displayed for you
to verify if this is the message you are going to send to.
222