Table of Contents
Advertisement
ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Follow the steps below:
i Select a pre-set MQTT Subscribe Topic from the dropdown list
ii Click "OK" button to confirm the settings and return to the Rule
11.2.7 Timer
You can change the Timer status (to Start or to Reset the Timer) in the
THEN/ELSE Action statement; the editing page for Timer Action
Setting is shown as below:
Follow the following steps:
i Select the pre-defined Timer from the dropdown list of the "Timer"
field. Please note: the Timer you select has to be created in
Advanced Setting.
ii Specify you want to "Reset" or "Start" this Timer when this
THEN/ELSE Action statement is executed. The Start Action will
start to run the Timer and if the Start Action is triggered one more
time when the Timer is running, the Timer will restart again. The
Reset action will reset the Timer and stop running the Timer.
Figure11-39 : MQTT Reset Topic action setting page
of the "Broker" and "Topic" fields. When this action is executed,
PMC/PMD would reset the message of the topic, and the
evaluation result of the IF statement which is associated with
the topic will be verified again.
settings page.
Figure11-40 : Timer action setting page
225
Advertisement
Table of Contents
