Table of Contents
Advertisement
ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Please follow the steps below for the SNMP Settings：
i. In the "Version" field, select the SNMP version that you want to use.
Currently PMC/PMD supports SNMP V2c and V1 protocol,
ii. In the "Read Community Name" field, input a string for "Read
Community Name" for SNMP function . The default string is "public".
iii. In the "Write Community Name" field, input a string for "Write
Community Name" for SNMP function. The default string is
"private".
iv. In the "Trap Community Name" field, input a string for "Trap
Community Name" for the SNMP function. The default string is
"public".
v. In the "Contact" field, input the "Contact" string.
vi. In the "Location" field, input the "Location" string,
The SNMP Manager List is a list for all SNMP Managers which will
interact with the SNMP Agent of PMC/PMD. Please follow the steps as
below to perform the setting for SNMP Managers. After all settings are
completed, click "Save" button to save the changes.
Figure6-8 :
SNMP Setting Page
57
Advertisement
Table of Contents
