I/O Module List Interface; Figure7-36 : Add The Modbus Rtu Power Meter Manually; Figure7-37 : Modbus Module List Interface - ICP DAS USA PMC-523 Series User Manual

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
7.3.4

I/O Module List Interface

After the Modbus RTU I/O module or Modbus TCP I/O module are
added to the I/O Module list via auto scan or manual work, the Modbus
RTU I/O modules and Modbus TCP I/O modules will be listed as
below:
The following functions allow to perform settings or rearrange order of
the Modbus I/O modules. Please select the Modbus I/O module and
click on the function button to perform the operations:
 Setting: Click the radio button in front of the Modbus I/O
 Move Up: Click the radio button in front of the Modbus I/O
 Move Down: Click the radio button in front of the Modbus I/O
 Copy: To copy the settings of a pre-set Modbus I/O module to
Figure7-36 : Add the Modbus RTU Power Meter manually
Figure7-37 :
module and click on "Setting" to get into the setting page of the
Modbus I/O module. The settings for each Modbus I/O module
will be given in the following section.
module and click on "Move Up" to move the Modbus I/O
module to upper order (upper index number (No)).
module and click on "Move Down" to move the Modbus I/O
module to lower order (lower index number (No)).
the new Modbus I/O module, please click the radio button in
Modbus module List Interface
99