10 Advanced Setting; 10.1 Email Setting - ICP DAS USA PMC-523 Series User Manual

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual

10 Advanced Setting

Advanced Setting provides additional features and allows you to perform more setting
on the PMC devices. Click on the Advanced Setting button, a column of buttons will
appear on the left of the page:
 Email Setting
 SMS Setting
 SNMP Trap Setting
 LINE Notify Setting
 Messenger Setting
 Timer Setting
 Schedule Setting
 PUE Setting
 Internal Register Setting
After complete the Advanced Setting, all the setting you define in the section will be
the property in the IF-THEN-ELSE rule setting page.
possible error when performing rule definition (IF-THEN-ELSE), please always
finish configuration in Advanced Setting before starting to define Rules. Avoid
unnecessary change in Advanced Setting after you finish rule definition. Unexpected
errors might occur if you violate this sequence: Advanced Setting Rule Setting. In
case you make any modification, please double check your settings and Rules
definition to make sure no errors are present.
more detailed information for these configurations.

10.1 Email Setting

PMC/PMD support Email messages sending function. This function allows
sending pre-input Email message(s) to pre-set Email receiver(s) under
certain conditions. The configuration page is shown as below:
Please note: In order to avoid
The following sections will describe
151