ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
11.1.9 Schedule
The Schedule can be used as evaluation criteria for IF condition
statement; the editing page for Schedule Condition Setting is shown as
follow:
Follow the steps below:
i Select the Schedule that you are going to use for IF condition
statement from the dropdown list of "Schedule" field.
ii The "Status" field must be "In Range". If the system time of the
PMC is in the range of date/time setting of the schedule, the result
of this condition evaluation will be "true".
iii Click "OK" button to confirm the settings and return to the Rule
settings page.
11.1.10 Mobile Network Signal Strength
The Mobile Network Signal Strength can be used as evaluation criteria
for IF condition statement; the editing page for Mobile Network
Signal Strength Condition Setting is shown as follow:
Follow the steps below:
i Select the unit that you are going to use for IF condition statement.
The interface provides dBm and Percent(%) for selection.
ii Set up the expression statement for the Mobile Network Signal
Strength value. Select an operator from "=", ">", "=" or "<=".
iii Specify the evaluation value. If the Mobile Network Signal Strength
value match the evaluation criteria, the result of this condition
Figure11-19 : Schedule condition setting page
Figure11-20 : Mobile Network Signal Strength condition setting page
209