ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
To modify the starting address or quantity setting, please click
If the user wants to assign a Nickname for the address blocks,
After all Coil Output settings of the Modbus RTU module are
The Discrete Input Setting of Modbus RTU Module
The Modbus RTU module Discrete Input Setting page is shown as
follow:
on the setting block and input the setting. Click "OK" for
modification or click "Remove" to remove the setting.
the user can click on the "Nickname Setting" tab, and then input
the Nickname for each address block. The Nickname will be
shown in the "I/O Information" and "Rule Setting" pages.
completed, click "OK" button to save the changes.
Figure7-45 :
Discrete Input Setting Page
109