ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
iv Nickname: For user to define a nickname for this power meter, this
nickname will be displayed on the "Power meter Information" and
"Rule Setting" pages. Default setting will be the model of the power
meter.
v Click
power meter, click "Save" button to save the changes.
7.1.4
Power Meter List Interface
After the Modbus RTU/TCP Power Meters are added to the power
meter list via auto scan or manual work, the Modbus RTU/TCP Power
Meters will be listed as below:
The following functions allow to perform settings or rearrange order of
the power meters. Please select the power meter and click on the
function button to perform the operations:
Setting: Click the radio button in front of the power meter and
to add the meter to the list (Figure 7-13). After adding the
Figure7-13 :
Add the Modbus TCP Power Meter manually
Figure7-14 :
click on "Setting" to get into the setting page of the power meter.
The settings for each power meter module will be given in the
Power Meter List Interface
80