Table of Contents
Advertisement
ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Follow the steps below to set up Time Synchronization Setting:
i. In the "Function Status" field, check "Enable" to enable the Time
Synchronization function.
ii. In the "SNTP Time Server" field, input the IP address or domain name of
the SNTP Time Server. There are 3 default SNTP Time Servers, the user
could modify the address to use other server. Click "Use Default SNTP
Time Servers" to restore the default Time Server settings.
iii. The default Port number setting is "123", currently it is not allowed to be
modified.
iv. In the "Sync Interval" field, select the time interval to specify how often
will the PMC/PMD automatically connect to SNTP time server for time
synchronization through the network. The user could set the time
interval to be 6, 12, or 24 hours.
v. After all settings are completed, click "Save" button to save the changes.
In addition, users can select the time zone of the PMC/PMD location from
the dropdown list in the "Time Zone" field, and enable the daylight saving
time function in the "Daylight Saving Time" field if required.
Figure6-3 :
Time Synchronization Setting
52
Advertisement
Table of Contents
