Cloud Upload Setting; Figure8-5 : Cloud Upload Setting Page - ICP DAS USA PMC-523 Series User Manual

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
"Frequency" field. The Frequency can be set as: once a day, once a
week or once a month.
vi After all settings are completed, click "Save" button to save the
changes.
Please Note:
1. All data logger files of PMC/PMD will be saved in the microSD card.
Before enable the Data Logger function, please make sure the microSD
card you use for PMC/PMD is FAT32 format.
2. The microSD card given with the PMC/PMD is in FAT32 format
already before delivery.
8.4

Cloud Upload Setting

Both Power Data logger files and I/O Data logger files can be upload to
remote ICP DAS IoTstar IoT Cloud Management Software. The Cloud
Upload Setting page is shown as below:
Follow the steps below:
ii In the "Function Status", check "Enable" to enable the Cloud Upload
function.
In the "Data Log Upload Function" section, select the data log type
ii
user would like to upload. The data log type could be "Power Data
Log" or "I/O Data Log".
iii After all settings are completed, click "Save" button to save the
changes.
Please Note: In order to enable the "Cloud Upload" function, please visit
'System Setting > Network Setting > Cloud Manager System' page and
complete the setting first.( ICP DAS IoTstar Cloud Manager System only
support PMC-523x/PMC-224x/PMD controller.)
Figure8-5 : Cloud Upload Setting Page
126