ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
11.1.13 Rule Status
The Rule Status (if the Rule is disabled or enabled) can be used as
evaluation criteria for IF condition statement.
be at least one edited rule on PMC/PMD controller for setting up Rule
Status in the IF Condition Setting
Status Condition Setting is shown as below:
Follow the steps below:
i Specify the Rule that is going to be used in the IF Condition
statement from the dropdown list of the "Rule" field.
ii Specify the Rule status to be "Disable" or "Enable" from the
dropdown list of the "Status" field. When the Rule status matches
the specified status, the evaluation result will be "true".
iii Click "OK" button to confirm the settings and return to the Rule
settings page.
11.1.14 Internal Register
Internal Register value can be used as evaluation criteria for IF condition
statement; the editing page for Internal Register Condition Setting is
shown as follow:
Follow the steps below:
i Select the Internal Register that you are going to use the value as
evaluation criteria for IF condition statement. Specify the Internal
Register Index from the dropdown list of "No." field.
Figure11-23 : Rule Status condition setting page
Figure11-24 : Internal register condition setting page
Please note: there must
page. The editing page for Rule
211