Group Mode - ICP DAS USA PMC-523 Series User Manual

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual

icon allows to hide the markers on the chart; click on
show the markers on the chart.
 "Connection Status" will reveal the connection status of the power
meter, the graphic indicators are shown as follow:
5.3.2

Group Mode

Select the option from the dropdown lists of the Group, Subgroup and
the Data Classification field, and then click on "Inquiry" button, it will
show the chart.
 Group
The preset group lists will be shown on the dropdown list of the
Group, if no group is pre-set, the inquiry operation will not be able to
perform.
 Subgroup
According to the selected Group option, the corresponding subgroups
will be listed. If the selected Group contains no subgroup or the
subgroup doesn't setup any loop/phase of the power meter, the
inquiry operation will not be able to perform.
 Data Classification
Data Classification allows to inquire various power data options,
including: V(Voltage), I(Current), kW(Real Power), kvar (Reactive
Power), kVA (Apparent Power), PF (Power Factor), kWh, kvarh,
kVAh, Daily Accumulated Electricity, and Actual Demand.
Please refer to Figure 5-16 for an example of Realtime Chart for "Group
Mode". Each time the Realtime Chart displays only one power
information classification. If a different power information classification
is inquired, the previously displayed chart will be closed automatically.
The user could choose desired power data classification to view the
corresponding Realtime Chart. The chart refreshes every 5 seconds.
: Online : Offline : Connecting
button to
26