ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
10.3 SNMP Trap Setting
SNMP Trap function allows PMC/PMD to initiative sending of the system
data, power meter data and IO channel data to the SNMP Manager in real
time automatically when unusual events occur; so that the SNMP Manager
can respond immediately with corresponding operations. The configuration
page for SNMP Trap setting is shown as below:
The settings steps are as below:
Input "Nickname" and "Specific ID" and then click
i
create a new SNMP Trap.
ii
To modify the settings of a pre-set SNMP Trap, please click on the
radio button in front of the SNMP Trap, and then click on "Setting",
then the SNMP Trap Parameter Setting page will be shown as below.
You can modify the settings of the SNMP Trap you selected if required.
iii In the SNMP Trap Parameter Setting page, you can input or modify the
Figure10-12 : SNMP Trap Setting Page
Figure10-13 : SNMP Trap Parameter Setting Page
button to
161