Table of Contents
Advertisement
ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Figure10-17 : "User-Defined Data" Interface in Edit Mode
Input your message in the "User-Defined Data" field, and then select
the "Source", "Module" and "Channel" from the dropdown list and
click "Insert" to add channel value encoded string into the
"User-Defined Data" content. The system will record the data the user
pre-set in the User-Defined Data, and save the real data values in the
SNMP Trap Variable Binding. When editing the content, the user can
select the "View" tab, and then the channel encoded string will be
displayed in the real index format of the channel for user to check the
settings in an easy way.
The figure above shows an example of the encoded strings, the variable
$C2M1ri4352 indicates the voltage value of PM-3114 Loop 1 on the
module 1 that is connected to COM2, the variable $C2M1ri4356
indicates the kW value of PM-3114 Loop 1 on the module 1 that is
connected to COM2. When users select the "View" tab, the channel
value encoded string will be displayed as "PM-3114 Loop1 V" and
"PM-3114 Loop1 kW" for user to check if the setting is appropriate
(Figure 10-18).
164
Advertisement
Table of Contents
