Xv-Board Setting (Pmd Series Does Not Support This Function.); Xv-Board Di Channel Settings; Figure7-18 : Xv-Board Setting Page - ICP DAS USA PMC-523 Series User Manual

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
7.2

XV-Board Setting (PMD series does not support this function.)

XV-Board is used to connect with PMC. The setting page allows the user to
set up the XV-Board that are connected to the PMC. The XV-Board Setting
page is shown as follow:
Please note: Each PMC is allowed to connect to one XV-Board module
only.
Select the XV-Board that are connected to the PMC from the drop down list
and click "Setting", a window for setting up the parameters of XV-Board
and its I/O channel will appear. The setting for the module is shown as
below:
 Nickname: For user to define a nickname for the module, this
nickname will be displayed on the "I/O Information" and "Rule
Setting" pages.
 Description: The Description field provides a space for the user to
make a brief description of this XV-Board.
The following section will introduce the DI, DO, AI and AO channel
settings of the XV-Board. After all settings are completed, click "Save"
button to save the changes.
7.2.1

XV-Board DI Channel Settings

The XV-Board DI Channel Setting page is shown as follow (using
PMC-5231+XV107 as an example):
Figure7-18 : XV-Board Setting Page
87