ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
FTP Server on the PMC/PMD side if required.
Idle Time Setting
After the administrator login into the PMC/PMD page, when the idle
time exceeds the pre-set time interval (default is 10 minutes), the
administrator will be automatically logout. The idle time could be set as
Disable/10/20/30/60 minutes, after the setting is completed, click "Save"
button to save the changes.
6.5
I/O Interface Setting
I/O Interface Setting allows to setup the function settings on
LAN of PMC/PMD. The setting interface is shown as below:
The I/O interface functions for PMC/PMD are as below.
Model
PMC-523x/
PMC-224x
Figure6-15 :
Local FTP Server Setting Page
Figure6-16 :
Figure6-17 :
I/O
I/O interface function
COM2
):Reserved specifically for Modbus
(RS-232
RTU Slave for connections to HMI or SCADA.
Idle
Time Setting
Page
Interface
Setting Page
COM Port or
61