Figure6-5 : Signal Strength Level And Ip Address For Mobile Network; Figure6-6 : Ddns Setting Page - ICP DAS USA PMC-523 Series User Manual

Power meter concentrator
Table of Contents

Advertisement

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
-3GWA occupies through 4G/3G Network.
PMC/PMD also provides the Dynamic DNS service. The following figure
illustrates the configuration interface:
Follow the steps below to set up Dynamic DNS service:
Click the services tabs on the right-top corner of "Dynamic DNS
i.
service". System provides two items for selection as "Service 1" and
"Service 2". User can enable one Dynamic DNS service for normal
status, or enable two Dynamic DNS services for the redundant service.
In the "Service Provider" field, select the provider of Dynamic DNS
ii.
services from the dropdown list. Currently system provides 4 service
providers for selection as "ChangeIP.com", "FreeDNS", "DynDNS"
and "No-IP". User can also select "Disable" to disable the service.
If user selects "No-IP", "ChangeIP.com" or "DynDNS", please enter the
iii.
ID, Password and Domain Name to login the service. If user selects
"FreeDNS", please insert the Token to login the service.
After all settings are completed, click "Save" button to save the
iv.
changes.
Figure6-5 :
Signal Strength level and IP address for Mobile Network
Figure6-6 :
DDNS Setting Page
55

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pmc-224 pmd series

Table of Contents