Table of Contents
Advertisement
ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
ix To modify the settings of a pre-set SMS Alarm, please click on the
radio button in front of the SMS Alarm, and then click on "Setting"
to modify the settings.
x To copy the settings of a pre-set SMS Alarm to the new SMS Alarm,
please click the radio button in front of the pre-set SMS Alarm and
then click "Copy", a new SMS Alarm will be added to the list and
the settings of the old SMS Alarm will be copied to this newly
added SMS Alarm.
xi To remove a pre-set SMS Alarm, please click the radio button in
front of the pre-set SMS Alarm and then click "Remove".
xii After you finish all the SMS Alarm selections and settings, click
"Save" button to save the settings.
10.2.2 SMS Command Setting
The SMS Command Setting page is shown as below:
Please follow the steps below:
i Make sure the "SMS Command" Tab is selected.
ii In the PIN field, input the 4 digit SIM card PIN code. If the PIN
code is not required, leave the field blank.
iii In the "SMS Command Function" section, click on "Enable" to
enable SMS Command function. The SMS Command list will be
displayed. If "Disable" is selected, the SMS Command list will be
disabled.
Figure10-8 :
SMS Command Setting Page (1)
157
Advertisement
Table of Contents
