Figure11-38 : Publish Message Action Setting Page - ICP DAS USA PMC-523 Series User Manual

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Follow the steps below:
i Select the specific Broker from the dropdown list of the
ii Specify the Broker Function status to be "Disable" or "Enable"
iii Click "OK" button to confirm the settings and return to the Rule
11.2.6.2 Publish Message
You can publish a MQTT Topic to the Broker when executing a
THEN/ELSE Action statement; the editing page is shown as
below:
Follow the steps below:
i Select a pre-set MQTT Publish Topic message from the
ii Click "OK" button to confirm the settings and return to the Rule
11.2.6.3 Reset Topic
You can reset the saved content of the subscribe topic when
executing a THEN/ELSE Action statement; the editing page is
shown as below:
"Broker" field.
from the dropdown list of the "Status" field. When the Action
being executed, the Broker Function status will be changed to
specified status.
settings page.

Figure11-38 : Publish Message action setting page

dropdown list of the "Broker" and "Message" fields. The
MQTT Publish Topic message will be displayed for you to
verify if this is the MQTT Publish Topic message you are going
to send to.
settings page.
224