Microsoft Azure; Figure11-31 : Microsoft Azure Function Status Action Setting - ICP DAS USA PMC-523 Series User Manual

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Follow the steps below:
i From the dropdown list of the "Power Meter & Channel" field,
select the Power Meter module and Channel.
ii Specify the output value of Power Relay from the dropdown list of
the "Status" field. The output value can be "OFF" or, "ON".
iii Specify the "Frequency" to be "One-Time" or "Repeat".
iv Specify the value in the "Waiting Time" field, it means after the
action be executed, how long the system will delay to execute the
next Action. The unit will be second(s)
v Click "OK" button to confirm the settings and return to the Rule
settings page.

11.2.4 Microsoft Azure

Click on "Microsoft Azure", 3 options will appear as the following:
"Function Status", "Publish Message" and "Reset Variable".
11.2.4.1 Function Status
User can execute an action to change the connection operation
between Microsoft Azure and PMC/PMD in the THEN/ELSE
Action statement; the editing page is shown as follow:
Follow the steps below:
i Specify the connection operation between Microsoft Azure and
ii Click "OK" button to confirm the settings and return to the Rule
11.2.4.2 Publish Message
You can publish messages to Microsoft Azure when executing a
THEN/ELSE Action statement; the editing page is shown as
below:

Figure11-31 : Microsoft Azure Function Status action setting

PMC/PMD to be "Disable" or "Enable" from the dropdown list
of the "Status" field.
settings page.
220