ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Follow the steps below:
i
ii Set up the expression statement for this channel value. Select
iii And then specify the evaluation value. If this AI channel value
iv PMC/PMD provides the following 7 values options; you can
Figure11-5 :
Specify the module and channel from the dropdown list of the
"Module & Channel" section that you are going to include its
value in the IF condition statements.
an operator from "=",">","<",">=" or "<=".
match the evaluation criteria, the result of this condition
evaluation will be "true".
compare them with the AI channel value for condition
evaluation:
User-Defined: The "User-Defined" value could be used as
evaluation criteria; input the "User-Defined" value under the
"Value" field.
Internal Register: The "Internal Register" value could be
used as evaluation criteria; select the number of the Internal
Register from the dropdown list.
The AI channel value from other ICP DAS modules(such as:
XV-Board/M-7000/DL) could be used as evaluation criteria;
select the module and channel from the dropdown list to
specify which channel value will be used.
AI condition setting page
198