Table of Contents
Advertisement
ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Figure6-9 :
SNMP Manager List
i. Set up IP Address or domain name of the SNMP Manager that you
want to add. Please set up the Address appropriately, if the settings
are not the same as the settings of the SNMP Manager, the interaction
between PMC/PMD and the SNMP Manager will be failed.
Figure6-10 :
The Address Setting for SNMP Manager
ii. Click to Enable (or Disable) the working model between the SNMP
Manager and the SNMP Agent of PMC/PMD. Currently PMC/PMD
provides two working models as Read/Write (Polling) and Trap for
SNMP Manager.
Figure6-11 :
The Working Model Setting for SNMP Manager
Please Note: If no "Read/Write" field on the list is enabled to accept
the Read/Write commands, indicating that it will allow accepting the
Read/Write commands from ANY SNMP Manager.
iii. After completing the IP address and working model setting, please
click
button to add the SNMP Manager to the list. After adding
58
Advertisement
Table of Contents
