Table of Contents
Advertisement
ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
The settings are as follow:
Nickname：For user to define nicknames for each I/O channel,
this nickname will be displayed on the "I/O Information" and
"Rule Setting" pages.
Power On Value: Specify the initial status to be "ON" or to be
"OFF" when PMC-523x power on. Select the value from the
dropdown list of "Power On Value" field. The default value is
"OFF".
PMC-523x provides 3 advanced functions, select the function
from the dropdown list:
Pulse Output: If the Pulse Output is selected, it will allow this
Auto OFF: When "Auto OFF" is selected, it allows this DO
Figure7-20 :
DO channel to perform pulse output and form a periodic
pulse cycle. In Pulse Output mode, the selected DO channel
will generate a square wave according to specified parameters
(Pulse High and Pulse Low). Pulse High indicates the "ON"
time duration and Pulse Low indicates the "OFF" time
duration in a periodic Pulse cycle. The unit is 100ms.
channel to enable Auto OFF function. It is required to set up a
time interval, when this DO channel is set to be "ON" and the
duration of the ON status reaches the pre-set time interval ,
the DO will automatically be set to OFF. The unit is second.
XV-Board DO attribute setting page
89
Advertisement
Table of Contents
