ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Assign Period :
manually。
Internal
selected internal register.
Please note: The user must setup internal register before using internal
register as timer period. Please refer to
Setting
iv Click
v Repeat steps i~iv to complete settings of all Timer.
vi To modify the settings of a pre-set timer, please click on the radio
button in front of the timer, and then click on "Setting" to modify the
settings. The setting user interface is as following:
Input the period interval in units of seconds
Register:Assign the period interval as the value of
to setup internal register.
button to create a new Timer.
Figure10-46 : Timer creating Page
Figure10-47 : Timer setting Page(Assign Period)
ch 10.8 Internal Register
184