Table of Contents
Advertisement
ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
The settings are as follow:
Nickname：For user to define nicknames for each power meter,
Description: The Description field provides a space for the user
Address: The address will be the Modbus address of this
Scan Rate: Input the time interval for PMC/PMD to periodically
Polling Timeout: The time interval for PMC/PMD to send
Retry Interval: The time interval to wait for PMC/PMD to
Figure7-15 :
this nickname will be displayed on the "Power Meter
Information" and "Rule Setting" pages.
to make a brief description of this power meter.
Modbus RTU power meter, please make sure the address setting
is the same as the settings of the module, if the setting is not
accurate, the connection for PMC/PMD to the power meter will
be failed.
retrieve the power data of this Modbus RTU Power Meter, the
setting range will be 0 ~ 65535 seconds.
command to the Modbus RTU Power Meter and wait for the
response, the unit will be ms. The setting range will be 1-10000
ms.
repeatedly send command again when PMC/PMD sends
command to the Modbus RTU Power Meter and get no response.
The unit will be second. the setting range will be 3 ~ 65535
PM-3133 Setting Page
82
Advertisement
Table of Contents
