HEX Value
Offset Hours
35
1
39
2
3D
3
3F
3.5
41
4
43
4.5
45
5
47
5.5
48
5.75
49
6
4B
6.5
4D
7
51
8
52
8.25
54
8.75
55
9
57
9.5
59
10
5B
10.5
5D
11
5F
11.5
61
12
64
12.75
65
13
69
14
70-FF
N/A
[025] Radio Activation Restore
Default (FF)
Program 00 to disable this event or FF to enable. This event will occur in North American cellular communicators when the
unit has been programmed by Connect 24.
System Test Options
Test Transmissions to Primary Receiver, with Backup to Secondary Receiver:
Set Ethernet section [026] to (FF); [027] to (00). Set cellular section [028] to (FF); [029] to (00).
If the test transmission fails to the primary receiver it will back up to the secondary receiver.
l
If the test transmission fails to the secondary receiver an FTC trouble will be generated.
l
Test Transmission Unique to Primary and Secondary Receivers:
Set Ethernet section [026] to (FF); [027] to (FF). Set cellular section [028] to (FF); [029] to (FF).
The module will send periodic test transmissions to each receiver independently, with no backups.
l
If the test transmission fails to any of the programmed receivers, an FTC trouble will be generated.
l
Alternate Test Transmission:
Alternate test transmission can be enabled or disabled in section [005] toggle option [7].
Section 5: Programming
Standard Abbreviation
CET
SAST
AST
IRST
GST
AFT
PKT
IST
NPT
VOST
MMT
BDT
CST
APO
ACWST
KST
ACST
AEST
LHST
VUT
NFT
NZST
CHAST
TOT
LINT
N/A
- 140 -
Location
Central European Time
South Africa Standard Time
Arabic Standard Time
Iran Standard Time
Gulf Standard Time
Afghanistan Time
Pakistan Time
Indian Standard Time
Nepal Time
Vostok Time
Myanmar Time
Bangladesh Standard Time
China Standard Time
Apo Island Time
Australian Central Western Standard Time
Korea Standard Time
Australian Central Standard Time
Australian Eastern Standard Time
Lord Howe Standard Time
Vanuatu Time
Norfolk Island Time
New Zealand Standard Time
Chatham Island Standard Time
Tonga Time
Line Island Time
N/A
Need help?
Do you have a question about the tyco Power Pro Series and is the answer not in the manual?