Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Johnson Controls Tyco PowerSeries Pro
Summary of Contents for Johnson Controls Tyco PowerSeries Pro
- Page 1 intrusion PowerSeries Pro HS3032 / HS3128 USER MANUAL WARNING: This manual contains information on limitations regarding product use and function and inform- ation on the limitations as to liability of the manufacturer. The entire manual should be carefully read.
-
Page 2: Table Of Contents
Chapter 1.0 Quick Reference 2.0 Safety Instructions 3.0 The PowerSeries Pro Security System 3.1 General System Operation 3.2 Carbon Monoxide Detection 3.3 Fire Detection 3.4 Testing the System 3.5 Monitoring 3.6 Maintenance 3.7 Applicable Models 4.0 Securing the Premises 4.1 Arming the System 4.1.1 Away Arming the System with the Keypad 4.1.2 Stay Arming the System 4.2 Arming the System with a 2-Way Wireless Key... - Page 3 Chapter 8.11 Setting the Voice Prompt volume 8.12 Setting the Voice Chime volume 8.13 Resetting the System 8.13.1 Engineer's Reset 8.13.2 Remote (Anti-code) Reset 8.14 Walk Test 9.0 Managing Partitions 9.1 Partitions 9.1.1 Single Partition Operation 9.1.2 Loaning a Keypad to Another Partition 9.2 Fire and CO Zone Types 10.0 Additional Features 10.1 Display Temperature For All Zones...
-
Page 4: Quick Reference
Chapter 1.0 Quick Reference The PowerSeries Pro Alarm System uses shortcut keys to access options or features on all models of keypads. When using an LCD keypad, the PowerSeries Pro alarm system additionally uses a menu based navigation system. Use the scroll keys to view the list of options contained within the current menu. - Page 5 Chapter Action Press Common Functions Set Time and Date [*][6] [Master Code] + [0][1] Turn Chime ON/OFF [*][4] + [Access Code†] OR Change Brightness [*][6] [Master Code] + [1][2] + Change Contrast [*][6] [Master Code] + [1][3] + Buzzer Volume [*][6] + [Master Code] + [1][4] + Add/Delete User [*][5] + [Master Code] + [Access Code] + 1...
-
Page 6: Safety Instructions
Chapter 2.0 Safety Instructions North America This equipment is cord connected, pluggable Type A, stationary with a non-detachable power supply cord and must be installed by skilled persons only (persons who have training or experience in the equip- ment technology, particularly in knowing the various energies and energy magnitudes used in the equip- ment). -
Page 7: The Powerseries Pro Security System
Chapter 3.0 The PowerSeries Pro Security System The PowerSeries Pro has been designed to provide the greatest possible flexibility and convenience. Read this manual carefully and have the installer provide instructions on how to operate the system and which features have been implemented. All users of this system should be equally instructed in its use. Fill out the "System Information"... -
Page 8: Monitoring
Chapter 3.5 Monitoring This system is capable of transmitting alarms, troubles and emergency information. If an alarm is initiated by mistake, immediately call the central station to prevent an unnecessary response. NOTE: For CP-01 systems, the monitoring function must be enabled by the installer before it is oper- ational. -
Page 9: Securing The Premises
Chapter 4.0 Securing the Premises The PowerSeries Pro provides multiple arming modes as described below: Away Mode Use this mode when there is nobody on the premises. Away mode activates all peri- meter and interior sensors in the alarm system. Stay Mode Use this mode when someone is on the premises. -
Page 10: Stay Arming The System
Chapter 4.1.2 Stay Arming the System Stay mode partially activates the alarm system by: Arming all perimeter sensors Bypassing all interior sensors Arm the System in Stay mode LCD Display Ensure all windows and doors are closed and that the Ready indic- Date Time ator is on. -
Page 11: Silent Exit Delay
Chapter Press and hold the Stay key for 2 seconds and, if required, System is enter the access code or present a proximity tag. Do not leave the Ready to Arm premises. then Present Tag or Enter Code If zones have been bypassed, a warning message appears. After successfully initiating the arming sequence the: Exit Delay in Progress... -
Page 12: No-Entry Arming
Chapter To gain access to interior areas that are armed during Night mode disarm the system by entering your access code. 4.6 No-Entry Arming No-Entry Arming arms the system in Stay mode by: Removing the Entry Delay from all configured zones. Arming all perimeter sensors. -
Page 13: Additional Bypass Features
Chapter Zone is currently open. You may be unable to arm the Zone Label <> system. Zone is bypassed. Zone Label <> Bypassed zones: Must be configured before arming the system. Can be configured using a keypad. Allow for access to protected areas when the system is armed. Allow you to arm the system if a zone is temporarily out of service. -
Page 14: Bypass Groups
Chapter Press [9][9][8] Press (*) for <> Bypass Options Scroll to Bypass Options using the keys [<][>] and press [*]. Scroll to Press (*) for <> Bypass Open Zones and press [*]. Bypass Op. Zones To exit bypassing mode, press [*]. If the system is ready to arm the Ready indicator will be lit. -
Page 15: Arming Troubles And Exit Faults
Chapter Press [9][9][5] to program the bypass group with the currently Press (*) for <> bypassed zones Prg Bypass Group Scroll to Bypass Options using the [<][>] keys and press [*]. Scroll to Program Bypass Group and press [*]. The Bypass Group is now programmed. Bypass Group Programmed To exit bypassing mode and return to the Ready state, press [#]. -
Page 16: Disarming The System
Chapter Follow the Away arming procedure again, making sure to close the entry/exit door properly. For more details see: “Away Arming the System with the Keypad”. 4.12 Disarming the System Depending on your system configuration, there are multiple methods you can use to disarm your system. You can disarm the system using a keypad, 2-way wireless key or a proximity tag: To Disarm the System with a Keypad Enter your access code or present your proximity tag when the system is armed (Armed indicator is... -
Page 17: Alarms
Chapter 5.0 Alarms The system can generate different alarm sounds, each with a different purpose and priority. Priority Type of Alarm What you hear Fire Temporal (3 beeps then a pause) or pulsed siren (continuous beeping) Carbon Monoxide 4 beeps, 5 second pause, 4 beeps Intrusion (Burglary) Continuous siren Flood 1 second on, 3 seconds off, repeating... -
Page 18: Intrusion (Burglary) Alarm - Continuous Siren
Chapter 5.5 Intrusion (Burglary) Alarm - Continuous Siren If you are unsure of the source of the alarm approach with caution! If the Intrusion alarm was accidental Enter your Access Code to silence the alarm. If the code is entered within 30s (or the programmed value of the alarm transmission delay) the transmission of the alarm to the monitoring station will be cancelled. -
Page 19: Wireless Keys
Chapter 6.0 Wireless Keys In addition to the keypad, the PowerSeries Pro system can be controlled using a variety of devices: 2-Way Wireless Keys Proximity Tags 6.1 Using 2-way Wireless Keys Wireless keys allow users in close proximity of their premises the ability to readily arm/disarm their sys- tem, and to call for help. -
Page 20: Managing Users
Chapter 7.0 Managing Users The maximum number of user access codes are as follows: 72 for HS3032 1000 for HS3128 Each user access code can be: Uniquely labeled. Assigned a proximity tag. In order to operate, proximity tags must be enrolled in the system. Assigned to only operate specific partitions. -
Page 21: Adding, Changing And Deleting Access Codes
Chapter To Open the Access Codes Menu LCD Display Press [*][5] Press (*) for <> Access Codes press [*] and use the scroll keys to navigate to Access Codes and press [*] to select. Enter Master or Supervisor code. Enter User # Press (*) for <>... -
Page 22: Naming A User
Chapter 7.1.3 Naming a User Adding or editing labels are accomplished by using the keypad to input the desired letters or numbers. The following figure depicts the three letters and one number that corresponds to each keypad button. The first press of the number key displays the first letter. The second press displays the second letter, etc. A, B, C, 1 D, E, F, 2 G, H, I, 3 J, K, L, 4 M, N, O, 5 P, Q, R, 6 S, T, U, 7 V, W, X, 8 Y, Z, 9,0... -
Page 23: Configuring Additional User Options
Chapter 7.2 Configuring Additional User Options Users can also be assigned the following feature options: [1] Supervisor Code For more information see "Access Code Types". [2] Duress Code For more information see "Access Code Types". [3] Zone Bypass Grants the user the ability to bypass zones. [7] Bell Squawk Use to generate a bell squawk when arming/disarming the system. -
Page 24: User Functions [Ù][6]
Chapter 8.0 User Functions [ ][6] Ù The PowerSeries Pro allows for a variety of user configurable functions as listed below: Event Buffer Auto Arm Time Late To Open Contrast Control User's Walk Test Time and Date System Service/DLS Late To Open Time Buzzer Control Auto Arm/Disarm Voice Chime User Call-Up... -
Page 25: Setting The Auto Arm Time
Chapter 8.4 Setting the Auto Arm Time The system can be configured to auto arm at a specific time on each day of the week. If a specific time is not configured for a day of the week the system will not arm automatically on that day. NOTE: This feature must be configured by installer. -
Page 26: Changing The Brightness Of The Lcd Keypad
Chapter To set the Late to Open time LCD Display From the User Function menu use the shortcut key [1][0] or press [<] Press (*) for <> [>] to scroll to Late to Open Time. Late to Opn Time Press [*] to open a days of the week sub menu. Scroll the days of the Press (*) for <>... -
Page 27: Resetting The System
Chapter Enter the 2-digit value or scroll to the desired volume level and press Voice Chime <> [#] to return to the previous menu. Level... XX Press [#] to return to the Ready state. 8.13 Resetting the System 8.13.1 Engineer's Reset If an alarm has occurred on your system, the system will not allow you to rearm (Ready light is OFF). - Page 28 Chapter If a zone is not activated within 15 minutes of initiating the Walk Test, the system will automatically exit the Walk Test and resume normal operation. An audible warning sounds the last 5 minutes to indicate the Walk Test is ending. NOTE: This feature is not available in CP-01 panels.
-
Page 29: Managing Partitions
Chapter 9.0 Managing Partitions A partition is a limited area of the premises which operates independently from the other areas. Par- titioning a system can be beneficial if the property has outbuildings that need to be secured inde- pendently of a main area or if the home has a separate apartment. Each partition can have its own keypad, or a keypad can have access to all partitions. -
Page 30: Fire And Co Zone Types
Chapter Partition auto arm pre-alert Partition is not ready to be armed Keypads can also be configured as global keypads, controlling all partitions. Global keypads must be configured by your installer. 9.2 Fire and CO Zone Types If a Fire zone generates an alarm only the partition the fire zone is assigned to will go into alarm. Other partitions retain their current state. -
Page 31: Additional Features
Chapter 10.0 Additional Features 10.1 Display Temperature For All Zones This feature displays the temperature for each enabled zone. To view zone temperature LCD Display Press [*] in the main menu on any partitioned keypad. Press (*) for <> Temperature Press [*] to select temperature. -
Page 32: Burglary Verification
Chapter To configure a Command Output to Follow a Schedule LCD Display Press [*][7] then use the scroll keys to navigate to Follow Schedule Output Control <> and press [*], followed by your access code. Scroll to View then Press (*) to press [*][7][9][User Code]. -
Page 33: Troubleshooting
Chapter 11.0 Troubleshooting Occasionally, you may have a problem with your Alarm Controller or telephone line. If this happens, your Alarm Controller will identify the problem and displays an error message. Refer to the provided list when you see an error message on the display. If additional help is required, contact your distributor for ser- vice. - Page 34 Chapter Trouble Notification Trouble Trouble Description Trouble Types Level 1 Condition Level 2 Level 3 Battery Trouble The system has detected a battery Low Battery trouble condition. No Battery Call for service. Low Battery Module 1-4 High-current No Battery Module 1-4 High-current Low Battery Module 1-4...
- Page 35 Chapter Trouble Notification Trouble Trouble Description Trouble Types Level 1 Condition Level 2 Level 3 Bus Voltage A module has detected a low HSM2HOST voltage on its Corbus red terminal. Keypad Keypad 1- Zone Expander Zone expander 1-15 1A Power Sup- Power Module 1-4 High-current...
- Page 36 Chapter Trouble Notification Trouble Trouble Description Trouble Types Level 1 Condition Level 2 Level 3 Device Faults The system has detected an issue Zone Zone label with one or more connected or 001-128 devices. Call for service. Keypad Keypad 1- Siren Siren 1-16 Repeater...
- Page 37 Chapter Trouble Notification Trouble Trouble Description Trouble Types Level 1 Condition Level 2 Level 3 Module The system has detected a super- HSM2HOST visory trouble condition with one or Supervision Keypad Keypad 1- more modules on the system. Call for service. Zone Expander Expander 1-15...
- Page 38 Chapter Trouble Notification Trouble Trouble Description Trouble Types Level 1 Condition Level 2 Level 3 Communications 11 The system has detected a com- munication trouble. Call for service. Receiver SIM Lock Cellular Ethernet Receiver Receiver Supervision Receiver Receiver Alt Comm Fault Alt Comm FTC Receiver Not Networked...
-
Page 39: Reference Sheets
Chapter 12.0 Reference Sheets Fill out the following information for future reference and store this guide in a safe place. 12.1 System Information [F] FIRE [M] MEDICAL [P] PANIC The Exit Delay Time is _______ seconds. The Entry Delay Time is _______ seconds. 12.2 Service Contact Information Central Station Information Account #: _____________________ Telephone #: _____________________... -
Page 40: Access Codes
12.3 Access Codes Master Code [01] : _________________________ Code Access Code Code Access Code Code Access Code Code Access Code NOTE: Copy this page as needed to record additional access codes. -
Page 41: Sensor/Zone Information
12.3.1 Sensor/Zone Information Sensor Protected Area Sensor Type Sensor Protected Area Sensor Type NOTE: Copy this page as needed to record additional zone information.. -
Page 42: Locating Detectors And Escape Plan
Chapter 13.0 Locating Detectors and Escape Plan The following information is for general guidance only and it is recommended that local fire codes and regulations be consulted when locating and installing smoke and CO alarms. 13.1 Smoke Detectors Research has shown that all hostile fires generate smoke to a greater or lesser extent. Experiments with typical fires in homes indicate that detectable quantities of smoke precede detectable levels of heat in most cases. -
Page 43: Fire Escape Planning
Chapter Figure 3a Figure 4 13.2 Fire Escape Planning There is often very little time between the detection of a fire and the time it becomes deadly. It is very important that an emergency escape plan be developed and rehearsed. Study the possible escape routes from each location within the house. -
Page 44: Carbon Monoxide Detectors
Chapter 13.3 Carbon Monoxide Detectors Carbon monoxide is colorless, odorless, tasteless, and very toxic, it also moves freely in the air. CO detectors can measure the concentration and sound a loud alarm before a potentially harmful level is reached. The human body is most vulnerable to the effects of CO gas during sleeping hours; therefore, CO detectors should be located in or as near as possible to sleeping areas of the home. -
Page 45: Regulatory Agency Statements
14.0 Regulatory Agency Statements FCC COMPLIANCE STATEMENT CAUTION: Changes or modifications not expressly approved by Digital Security Controls could void your authority to use this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 46: En Compliance
FCC AND ISED CANADA FOR WIRELESS KEYPADS WARNING! To comply with FCC and ISED Canada RF exposure compliance requirements, the HS2LCDRF(P)9 or HS2LCDWF(P)9 keypads should be located at a distance of at least 20 cm from all persons during normal operation. The antennas used for this product must not be co-located or operated in conjunction with any other antenna or transmitter. - Page 47 6.4.5 Completion of unsetting using a digital key (e.g., MPT or PG8929, PG8939, PG8949) either before entering the protected premises (use PG8929, PG8939, PG8949) or after entering the protected premises (use MPT). The entry delay is activated if the ini- tial entry door is opened before the HS3032, HS3128 has been unset.
-
Page 48: Eula
Chapter 14.4 EULA IMPORTANT - READ CAREFULLY: DSC Software purchased with or without Products and Components is copyrighted and is purchased under the following license terms: This End-User License Agreement (“EULA”) is a legal agreement between You (the company, individual or entity who acquired the Software and any related Hardware) and Digital Security Controls, a division of Tyco Safety Products Canada Ltd. -
Page 49: Installer Warning
Chapter (d) DISCLAIMER OF WARRANTIES - THIS WARRANTY CONTAINS THE ENTIRE WARRANTY AND SHALL BE IN LIEU OF ANY AND ALL OTHER WARRANTIES, WHETHER EXPRESSED OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON THE PART OF DSC. - Page 50 The trademarks, logos, and service marks displayed on this document are registered in the United States [or other countries]. Any mis- use of the trademarks is strictly prohibited and Tyco Security Products will aggressively enforce its intellectual property rights to the fullest extent of the law, including pursuit of criminal prosecution wherever necessary.