AutomationDirect C0-USER-M Manual page 33

Chapter 1: Getting Started
Step 6: Establish PC to PLC Communications, (cont'd)
NOTE: If using the USB to RS232 converter, and you are not
sure to which PC COM Port the USB port is assigned, click the
Detail... button next to the COM Port drop down list to identify
it. The screen to the right shows the Koyo USB-Serial Com
Port device assigned to COM3. Select it and click OK.
Proceed to page 1-24
CLICK PLC Hardware User Manual, 6th Edition, Rev. F – C0-USER-M 1–19