Advertisement

Quick Links

A
ccessories
C
C
ontents of this
hapter
Accessories Part Numbering � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � A-2
Line Reactors� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � A-2
Line Reactor Specifications - LR Series� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � A-3
Line Reactor Specifications - Legacy GS Series (do not use for new installations) � � � � � � � � � � � � A-3
Line Reactor Dimensions - LR Series � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � A-4
Line Reactor Dimensions - Legacy GS Series (not for new installations) � � � � � � � � � � � � � � � � � A-7
Line Reactor Applications and Connections � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � A-8
RF Filter� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � A-11
RF Filter Dimensions� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �A-11
RF Filter Wiring� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �A-11
Fuses and Fuse Kits � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � A-12
Fuse Block Dimensions � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �A-12
Ethernet Interface � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � A-13
ZIPLink™ Cables for RS-485 Modbus RTU � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � A-14
GS Drive Configuration Software� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � A-15
Software Functions � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �A-15
System Requirements � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �A-15
Configuration Cable � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �A-15
GS1 Series AC Drives User Manual - 3rd Edition - 11/09/2018
A
A
A
ppendix
ppendix
ppendix
A
A
A
Page A-1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GS1 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for AutomationDirect GS1 Series

  • Page 1: Table Of Contents

    Configuration Cable � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �A–15 GS1 Series AC Drives User Manual – 3rd Edition – 11/09/2018...
  • Page 2: Accessories Part Numbering

    “non-inverter-duty” motors, and for any motors when the length of wiring between the AC drive and motor exceeds 75 feet. There are two types of AutomationDirect line reactors that can be used with GS1 AC Drives; the original GS series reactors (legacy) and the newer LR series reactors.
  • Page 3: Line Reactor Specifications - Lr Series

    6�50 mH 230V 0�5 GS1-20P5 (in/out) / 3ph / 230V GS-21P0-LR-3PH 3�00 mH GS1-21P0 (in/out) / 3ph / 230V GS-22P0-LR-3PH 1�50 mH GS1-22P0 (in/out) / 3ph / 230V GS1 Series AC Drives User Manual – 3rd Edition – 11/09/2018 Page A–3...
  • Page 4 3.75 [95.3] 3.75 [95.3] 4.00 [101.6] 3.05 [77.5] 2.00 [50.8] MOUNTING 1.44 [36.6] 1.44 [36.6] 2.00 1.64 [50.8] [41.7] MOUNTING 4X Ø0.25 [Ø6.4] 0.88 0.31 [7.9] [22.4] Page A–4 GS1 Series AC Drives User Manual – 3rd Edition – 11/09/2018...
  • Page 5: Line Reactor Dimensions - Lr Series

    [152.4] 4.81 [122.2] 4.00 [101.6] 5.00 [127.0] 2.50 [63.5] 2.50 12X 0.31 [63.5] [7.9] 2.50 3.19 [63.5] [81.0] MOUNTING 2.00 [50.8] 4X Ø0.25 [Ø6.4] MOUNTING 3.20 [81.3] GS1 Series AC Drives User Manual – 3rd Edition – 11/09/2018 Page A–5...
  • Page 6 LR-20p5, LR-21p0, LR-22p0 nitS incHeS Mounting feet with multiple mounting slots allow replacement of most other reactors using existing mounting holes. Use four bolts to mount the LR reactors. Page A–6 GS1 Series AC Drives User Manual – 3rd Edition – 11/09/2018...
  • Page 7 0�28 x 0�63 GS-20P5-LR-3PH [7�1 x 16�0] 2�80 [1�3] 1�44 GS-21P0-LR-1PH [36�6] 3�40 4�40 2�83 1�77 [86�4] [111�8] [71�9] [45�0] GS-21P0-LR-3PH 2�30 [1�0] 2�00 GS-22P0-LR-3PH 2�80 [1�3] [50�8] GS1 Series AC Drives User Manual – 3rd Edition – 11/09/2018 Page A–7...
  • Page 8: Line Reactor Applications And Connections

    If installing a line reactor on the output side of the drive, especially with motor lead lengths in excess of 75 feet, lower the drive PWM output carrier frequency to 4kHz in order to protect the line reactor from excess heating and possible damage. Page A–8 GS1 Series AC Drives User Manual – 3rd Edition – 11/09/2018...
  • Page 9 A single reactor should be used with multiple motors ONLY when the motors will operate simultaneously from a single AC drive. OVERLOAD RELAYS are recommended for use in multiple motor applications. GS1 Series AC Drives User Manual – 3rd Edition – 11/09/2018 Page A–9...
  • Page 10 *GS series 1-phase reactors include a B-phase winding. *LR series 1-phase reactors do not include a B-phase winding. arning nsurE that you propErly insulatE tErminals BEforE making any connEctions to singlE phasE poWEr Page A–10 GS1 Series AC Drives User Manual – 3rd Edition – 11/09/2018...
  • Page 11: Rf Filter

    Wind each wire four times around the core. The RF filter should be located as close as possible to the output side of the drive. AC Drive Power MOTOR Supply GS1 Series AC Drives User Manual – 3rd Edition – 11/09/2018 Page A–11...
  • Page 12: Fuses And Fuse Kits

    Branch circuit ovErcurrEnt protEction should BE sEparatEly providEd using applicaBlE local codEs The following fuse kits consist of one fuse block and fuses sized to match each GS1 Series AC Drive. Replacement fuses are also available, and their part numbers are listed in the table below.
  • Page 13: Ethernet Interface

    This function can be set up through the drive parameter group 9. Refer to the “GS Series AC Drive Ethernet Interface User Manual” or www.AutomationDirect.com detailed information. GS1 Series AC Drives User Manual – 3rd Edition – 11/09/2018 Page A–13...
  • Page 14: Ziplink™ Cables For Rs-485 Modbus Rtu

    In addition to these GS-specific cables, the ZIPLink product line also includes other components which can be useful for Modbus wiring. Refer to Ch5 “GS1 Modbus Communications” for more information. Page A–14 GS1 Series AC Drives User Manual – 3rd Edition – 11/09/2018...
  • Page 15: Gs Drive Configuration Software

    GSoft is the optional configuration software for the AutomationDirect GS family of drives. It allows you to connect a personal computer to GS1 drives via RS-485, and perform a variety of functions: • Upload/download drive configurations • Create new drive configurations using Quick Start, Detailed, or Schematic Views •...
  • Page 16 Appendix A: Accessories BLANK PAGE Page A–16 GS1 Series AC Drives User Manual – 3rd Edition – 11/09/2018...

Table of Contents