AutomationDirect C0-USER-M Manual page 234

Each Input Mode consumes the available number of High-Speed Inputs. The Reset and Enable
features can use High-Speed Inputs, Digital Input Modules, or Control Relays (Internal Bits).
The transition delay (latency) is longer for Input Modules and Control Relays since these are
scan based.
High-Speed Mode
High-Speed Count (HSC)
Interval Measurement (ITV)
Duration Measurement (DUR)
Frequency Measurement (FRQ)
CLICK PLC Hardware User Manual, 5th Edition, Rev. F – C0-USER-M
Chapter 3: Installation and Wiring
Input Type
Up Count
Down Count
Up and Down Counts
Pulse and Direction
Quadrature (A and B)
Quadrature (A and B with Z)
Single Input
Dual Inputs
Single Input
Single Input
Quadrature (A and B)
High-Speed
Inputs Reset Input
Required
1
Optional
2
3 N/A
1
2 Optional
1
1
N/A
2
Enable Input
Optional
N/A
3–45