Parameter Unit Cable (R88A-Ccw002C) - Omron OMNUC R88D-WT15HF User Manual

Standard Models and Specifications
H Performance Specifications
Model
Type
Accessory cable
Connectors
Display
External dimensions
Weight
Communications
Standard
specifications ifi i
Communica-
tions method
Baud rate
Start bits
Data
Parity
Stop bits
Errors detected by Parameter
U Unit

2-8-2 Parameter Unit Cable (R88A-CCW002C)

If the 1-meter cable provided with the Parameter Unit is not long enough, then replace it with R88A-
CCW002C Parameter Unit Cable (2 meters).
Note If this cable is connected to an OMNUC U-series Hand-held Parameter Unit (R88A-PR02U), the
Parameter Unit can be used as an OMNUC W-series Parameter Unit. (Operation is the same as
for the R88A-PR02W.)
D Cable Models
Model
R88A-CCW002C
D Connection Configuration and External Dimensions
Parameter Unit
R88A-PR02W
R88A-PR02U
2-178
Hand-held
1 m
7910-7500SC (10 pins)
7-segment LED
63 × 135 × 18.5 mm (W × H × D)
Approx. 0.2 kg (including 1-m cable that is provided)
RS-232C
Asynchronous (ASYNC)
2,400 bps
1 bit
8 bits
None
1 bit
Display
CPF00
CPF01
Length (L) Outer diameter of sheath
2 m 6 dia.
Standards
Cannot transmit even after 5 seconds have
elapses since power supply was turned on.
A BCC error or faulty reception data has oc-
curred for five consecutive times, or a time
overrun (1 s) has occurred for three consecu-
tive times.
Approx. 0.2 kg
Chapter 2
Weight
R88D-WTj
Servo Driver