Omron OMNUC R88D-WT15HF User Manual page 107

Standard Models and Specifications
H Control Output Circuits
D Position Feedback Output
Phase A
Output line driver
SN75ALS174NS Phase B
or equivalent
Phase Z
D Sequence and Alarm Outputs
Servo Driver side
Note An automatic reset fuse is provided to protect output. If the fuse is activated for overcurrent, it will
automatically reset after a fixed period of time has lapsed without current flowing (supported by
Servo Drivers with software version "r.0037" or later).
2-76
Servo Driver
Shell
To other output circuits
(See
Di
note.)
Di: Diode for preventing surge voltage (Use
speed diodes.)
Controller for user
R = 220 to 470 Ω
External power
Maximum operating voltage:
supply
Maximum output current:
24 V DC ± 1 V
Chapter 2
Phase A
Phase B
Phase Z
Applicable line receiver
SN75175/MC3486
/AM26LS32
30 V DC
50 mA