Honda INTERCEPTOR 2002 Service Manual page 565

BATTERY / CHARGING SYSTEM
Remove the flywheel using the special tools
TOOL:
Rotor puller
INSTALLATION
07733-0020001 o r
07933-3950000
Clean any oil from the crankshaft taper and mating
surface of the flywheel.
Install the flywheel.
Apply oil to the flywheel bolt threads and seating
su rface.
Install the washer and flywheel bolt.
Hold th e flywheel using the f lywheel holder, then
tight en t he bolt to t he specified torque.
TOOL:
Flywheel holder 07725-0040000
(Equivalent commer-
cially available in
U.S.A.)
TORQUE: 103 N ·m (10.5 kgf·m, 76 lbf.ft )
ALTERNATOR COVER INSTALLATION
17-12
Apply sealant to the mating surfaces of the crank-
case as shown.