Honda INTERCEPTOR 2002 Service Manual page 129

LUBRICATION SYSTEM
4-12
Install the dowel pins and oil pump spacer.
Install the drive pin into the hole in the pump shaft.
Install the cooler pump outer and inner rotor into
the oil pump cover.
Install the dowel pins.
Install the oil pump cover assembly onto the oil
pump body.
Install and tighten the assembly bolts to the speci-
fied torque.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf.ft)
Install the oil pressure relief valve with its small O.D.
side facing the spring.
Install the spring and spring seat.
OIL PUMP SHAFT
OIL PUMP SPACER
DOWEL PINS
INNER ROTOR
OIL PUMP COVER
DRIVE PIN
ASSEMBLY BOLTS
SPRING SEAT RELIEF VALVE