Honda INTERCEPTOR 2002 Service Manual page 528

ANTI-LOCK BRAKE SYSTEM (ABS)
6. Wire Harness Continuity Inspection
Disconnect the rear wheel speed sensor 2P con- .-- - -- - - - -- -- -- - - - -- -,
nector.
Short the terminals of the connector with a
jumper wire.
Check for continuity between the ABS control
unit 12P (Black) connector w ire harn ess side ter-
minals.
Connection: Black/orange- Blue/ brown
Standard: Continuity
Is there continuity?
YES -GO TO STEP 7.
NO - Open or short circuit in wire between
the ABS cont rol unit and rear wheel
speed sensor.
7. Rechecking Indicator Function
Remove the rear wheel speed sensor and
replace it with a new one.
Connect the ABS control unit 12P (Black) connec-
tor.
Perform the pre-start self-diagnosis and check
the ABS indicator.
Is the indicator blinking?
YES - Faulty ABS control unit.
NO - Faulty removed wheel speed sensor.
Problem code 4: Front modulator control motor
system
1. ABS Indicator Function Rechecking
Before troubleshooting check for the following:
• Front ABS fuse 30A connection.
• Short or open circuit in wire harness between
the fuse box and ABS control unit.
Retrieve the p robl em code and erase it.
Perform the pre-start self-diagnosis and check
the ABS indicator.
Is the indicator still blinking?
NO - • Fine foreign matter in modulator or
the ABS control unit has been dis-
rupted by an extremely powerful
radio wave.
• Check the connector and wire har-
ness of the speed sensor system for
loose connect ion.
YES -GO TO STEP 2.
rill
Bl/0 Bu/Br
I
12
13
1
r
16-13