Honda INTERCEPTOR 2002 Service Manual page 496

Remove t he mounting bolts, nuts, collars and rear
master cylinder.
DISASSEMBLY
Remove the boot.
Remove the snap ri ng from the master cylinder
body usi ng the special tool as shown.
TOOL:
Snap ring pliers 07914-SA50001
Remove t he push rod/ master piston, primary cup
and spring.
Clean the inside of the cylinder with brake f luid.
INSPECTION
Check the piston boot, pri mary cup and secondary
cup for fatigue or damage.
Check the master cylinder and piston fo r abnormal
scratches.
Measure the master cylinder I.
D.
SERVICE LIMIT: 17.515
mm
(0.6896 in)
HYDRAULIC BRAKE
SNAP RING SNAP RING PLIERS
SPRING
_ ,
~jRIMARY
CUP
\'
PUSH ROD/MASTER PISTON ASSEMBLY
15-29