Cylinder Head Assembly - Honda INTERCEPTOR 2002 Service Manual

Using a 45° seat cutter, cut the seat to the proper
width.
Make sure that all pitting and irregularities are
removed.
Refinish if necessary.
After cutting the seat, apply lapping compound to
the valve face, and lap the valve using light pres-
sure.
I
NOTICE
I
• Excessive lapping pressure may deform or dam-
age the seat.
• Change the angle of lapping tool frequently to
prevent uneven seat wear.
• Do not allow lapping compound to enter the
guides.
After lapping, wash all residual compound off the
cylinder head and valve.
CYLINDER HEAD ASSEMBLY
FRONT CYLINDER HEAD (NORMAL VALVE SIDE):
~ ~
,.,._.
INNER VALVE SPRING
~ ~
--jill'
EXHAUST STEM SEAL
CYLINDER HEAD/ VALVES
1.0 mm (0.04 in)
""
SPRING SEAT
VALVE GU IDE ·
· 1
--:Jt
EXHAUST VALVE
INTAKE VALVE
8-29