Abs Control Unit - Honda INTERCEPTOR 2002 Service Manual

Connect the control motor 2P (Black) and crank
angle sensor 3P (Gray) connectors.
Fill and bl eed the lever and pedal brake hydraulic
system (page 15-7) .
ABS CONTROL UNIT
REMOVAL/INSTALL TION
Remove the upper cowl (page 2- 12).
Remove the ABS control unit cover screw and
cover.
Remove the control unit from the bracket.
Remove the cover from the control unit.
Disconnect the ABS control unit 10P (Black), 5P
(Black) and 5P (Brown) connectors.
Installation is in the reverse order of removal.
Align the ABS control unit cover tab with the slit in
the bracket.
ANTI-LOCK BRAKE SYSTEM (ABS )
16-37