Honda INTERCEPTOR 2002 Service Manual page 199

FUEL SYSTEM (Programmed Fuel Injection)
Loosen the throttle body side insulator band screws
using a long type phillips screwdriver through the
frame hole.
Remove the throttle body from the insulators.
NOTICE
I
Do not hold the fuel pipe on the throttle body while
removing the throttle body.
Do not snap rne
Remove the throttle cable bracket socket bolts and
throttle valve from
disconnect the throttle cable ends from the throttle
full open to full
drum.
close after the
throttle cable has
been removed. It
may cause incor-
rect 1dle operat1on.
5-64
Loosen the hose band screws and disconnect the
fast idle wax unit water hoses from the wax unit.
Seal the cylinder head intake ports with tape or a
clean cloth to keep dirt and debris from entering the
intake ports after the throttle body has been
removed.