Honda INTERCEPTOR 2002 Service Manual page 511

HYDRAULIC BRAKE
ASSEMBLY
CALIPER BRACKET
._.,
.._,... 32 N·m (3.3 kgf·m, 24 lbf.ft)
BRACKET PIN BOOT
15-44
CALIPER PISTON
1!1
..--' i iSiel
DUST
SEAL~ a
S It
PISTON SEAL
Coat the new piston seals with clean brake fluid.
Coat the new dust seals with silicone grease.
Install the piston and dust seal into the groove of
the caliper body.
Coat the caliper pistons with clean brake fluid and
install them into the caliper cylinder with their open
ends toward the pad.
Install the caliper body B and tighten the new bolts
to the specified torque.
TORQUE: 32 N·m (3.3 kgf·m, 24 lbf.ft)
I
PISTON SEALS
~.,
----
..--' i iSiel
DUST SEALS
CALIPER BODY B
~
s
BOLTS
CALIPER PIN BOOT