Honda INTERCEPTOR 2002 Service Manual page 122

OIL PRESSURE INSPECTION
If the otl pressure
matcator light
remains
on
a few
second~ check the
mdtca ror
system
before checking the
oil pressure.
Remove the side cowl (page 2-8).
Remove the oil filter cartridge using the special tool.
TOOL:
Oil fi lter wrench 07HAA-PJ70101
Apply oil to the oil pressure gauge joint attachment
O-rin g.
Install the oil pressure gauge joint attachment to t he
engine block, then tighten the nut.
TOOL:
Gauge joint attachment 07RM K-MW40100
Reinstall the oil filter cartridge.
Install the oil pressure gauge attachment and oil
pressure gauge to the gauge joint attachment.
TOOLS:
Oil pressure gauge 07506-300001
Equivalent commer-
cially available in
U.S.A.
Oil pressure gauge attachment 07406-00300001
Equivalent commer·
cially available i n
U.S.A.
Check the oil level.
LUBRICATION SYSTEM
OIL PRESSURE GAUGE
ATTACHMENT
Warm up the engine to normal operating tempera- '---- - -- -- -- - - __ __ __ ___,
t ure (approxi mately 80°C/176° F) and increase the
rpm to 6,000 min·
1
(rpm) and read the oil pressure.
OIL PRESSURE:
490 kPa (5.0 kgf/cm
2
,
71 psi) at 6,000 rpm/
(80°C/176° F)
4-5