Honda INTERCEPTOR 2002 Service Manual page 490

Keep the piston,
Coat all parts w ith clean brake f lui d before assem-
cups, spring, snap
bly .
ring and boot as a
set; do not substi-
tute indwidual
parts.
When installing the
cups, do not allow
the lips to rum
inside out.
Dip the piston in brake f luid.
Install the primary cup onto the tip of the spring.
Install the spring/ primary cup into the master cylin-
der.
Install the piston assembly int o the master cylinder.
Be certain the snap
Install t he snap ri ng using the special tool.
ring is firmly seated
in the groove.
TOOL:
Snap ring pliers
07914-SA50001
Apply silicone grease to t he inside of the boot and
master piston tip.
Inst all t he boot.
HYDRAULIC BRAKE
MASTER PISTON
I
SECONDARY CUP
MASTER CYLINDER
PR IMARY CUP
SNAP RING PLIERS
SNAP RING
15-23