Honda INTERCEPTOR 2002 Service Manual page 457

REAR WHEEL/SUSPENSION
Press t he needle bearing out of the shock absorber
lower mount using the special tools.
TOOLS:
Driver shaft
Attachment, 24 X 26 mm
Pilot , 17 mm
07946-MJ00100
07746-0010700
07746-0040400
Press the needle
Press a new needle bearing into the lower mount so
bearing into the
that the need le bearing surface is 7.8- 8.2 mm (0.31
lower mount with -
0.32 in) from the end of the lower mount using the
the marked side
same tools.
facing out.
14-28
Apply grease to the new dust sea l lips, install them
into t he lower mount.
Install the pivot collar.
DRIVER SHAFT
ATTACHMENT/PILOT
7.8-
(0.31
,,
~~
8.2mm
-0.32 in)