Honda INTERCEPTOR 2002 Service Manual page 162

FUEL SYSTEM {Programmed Fuel Injection)
PGM-FI MIL 13 BLINKS (No. 2 INJECTOR)
1. Injector Connection Inspection
Turn the ignition switch OFF.
Disconnect the No. 2 injecto r 2P connector.
Check fo r loose o r poo r contact on the No.2
injector 2P connector.
Connect the No.2 injector 2P connector.
Turn the ignition switch ON.
Check that the MIL blinks.
Is the MIL blinking?
NO - Loose or poor contact on the No.2 injec-
tor connector.
YES - GO TO STEP 2.
2. No.2 Injector Resistance Inspection
Turn the ignition switch OFF.
Disconnect the No.2 injector 2P connector and
measure the resistance of the No.2 injector 2P
connector terminals.
Connection: Black/white (+)-Red/yellow (-)
Standard: 10.5- 14.5
n
(20 °C/68 °F)
Is the resistance within 10.5 - 14.5
n
(20 ° C/ 68
Of )?
NO - Faulty No.2 injector.
YES - GO TO STEP 3.
No.2 INJECTOR 2P CONN ECTOR
No.2 INJECTOR 2P CON NECTOR
No.2 INJECTOR 2P CONNECTOR
No.2 INJECTOR 2P CONNECTOR
5-27