Honda INTERCEPTOR 2002 Service Manual page 419

FRONT WHEEL/ SUSPENSION/ STEERING
Secure the thronle cables to the right fork leg with
the wire band.
Install the brake hose 3-way joint to the left fork leg
and tighten the bolt to the specified torque.
TORQUE: 10 N·m (1.0 kgf·m , 7 lbf·ft)
Install and tighten the new left caliper pivot bolt to
the specified torque.
TORQUE: 31 N·m (3.2 kgf·m, 23 lbf·ft)
Install and tighten the new left caliper (secondary
master joint) bolt to the specified torque.
TORQUE: 31 N·m (3.2 kgf·m, 23 lbf.ft)
Install the following:
- Front wheel (page 13-16)
- Handlebar (page 13-7)
STEERING STEM
REMOVAL
13-30
Remove the following:
- Frontwheel(page13-11)
- Upper cowl (page 2-12)
Release the wire band and disconnect the ignition
switch 4P (White) connector.
LEFT BRAKE CALI PER
-.Jill
4P (WHITE) CONNECTORS