Cfi Electronic Control Unit (Ecu) - Honda 1986 GoldWing GL1200A Manual

CFI Electronic Control Unit ( E C U ) - - - - - - - - - - - - - -
Removal
Remove the seat and the saddlebag lids. Remove the
license plate light
Remove the boli and 2 ECU bracket nuts, then remove
the ECU from the travel trunk bracket.
Carefully slide the ECU out of tts case. Press out the
ECU coupler lock. and disconnect the coupler from the
ECU.
NOTES:
• Do not pry the coupler open or bend the terminals.
• Keep water, oil, and dirt away from the terminals.
• Do not attempt to disassemble the ECU.
InstallatIon
Attach the ECU coupler to the ECU hinge, and push it in
until the lock engages.
Slide the ECU into its case, and install the dust cover.
CAUTION: If the dust cover Is not Installed, the ECU
may be damaged by water or dust.
Position the ECU under the travel trunk, and install the
bolt and mounting nuts.
10-33